When it comes to creativity, there are no bounds to it and people can explore a lot of ways to express art and making of jewellery beads. Using Paper Bead Roller is one of the methods used during this practice of doing it yourself or DIY. This is a very eco-friendly and waste management method that limits unwanted waste papers from lending on the environment and are used for good.
For one to excel in paper pellet rolling there are no particular by book rules to follow but it is mainly a skill that revolves around creativity and imagination for successful execution of the project. To make the beads a beads roller is required and one can purchase an already made one or can also make one for themselves through DIY.
The first step is very easy but most crucial as it is the deciding phase of the type of jewelry you wish to make and hence it is here you cut and trim the papers into the shape you desire your item to possess. At this very first stage is where you also consider the shape and the pattern your item should have and hence cut all the papers accordingly.
The next step is to now start the rolling and first to be placed on the pill roller is the wide side and slowly the rolling progresses. This is a process that should be conducted with no hurry as it is here if one is not careful enough they can ruin the entire thing. These are very light materials and hence one should be really tender with them.
As you continue rolling ensure that you have a tight hold on both the pill roller and on the paper being rolled. Do not loosen the grip until you are almost at the end and here you can loosen it and adjust the shape of your beads while getting rid of any hanging ends if there are any. Do not force any ends to meat as these causes tear.
Having rolled the papers as per your desired shape it then becomes the time to close it and at this stage, glue is applied to hold the paper in place. Ensure that you apply the appropriate amount of glue on your paper and avoid using too much glue for these to avoid creating the mess with your work and too little glue will also not get the work done.
By the time you are done with the first four steps most of the hard work has already being done and now it is time to start with the finishing of this product. Here a smooth brush should be used to level all the layers of the glue and to give the beads an identical appearance so as to keep them consistent with one of the other.
This, as said earlier is not a by rule project to do but one that requires creativity alone. After finishing all of the processes one can even opt to use a desired colour on the jewels to finish then fully and give them a beautiful appearance.
For one to excel in paper pellet rolling there are no particular by book rules to follow but it is mainly a skill that revolves around creativity and imagination for successful execution of the project. To make the beads a beads roller is required and one can purchase an already made one or can also make one for themselves through DIY.
The first step is very easy but most crucial as it is the deciding phase of the type of jewelry you wish to make and hence it is here you cut and trim the papers into the shape you desire your item to possess. At this very first stage is where you also consider the shape and the pattern your item should have and hence cut all the papers accordingly.
The next step is to now start the rolling and first to be placed on the pill roller is the wide side and slowly the rolling progresses. This is a process that should be conducted with no hurry as it is here if one is not careful enough they can ruin the entire thing. These are very light materials and hence one should be really tender with them.
As you continue rolling ensure that you have a tight hold on both the pill roller and on the paper being rolled. Do not loosen the grip until you are almost at the end and here you can loosen it and adjust the shape of your beads while getting rid of any hanging ends if there are any. Do not force any ends to meat as these causes tear.
Having rolled the papers as per your desired shape it then becomes the time to close it and at this stage, glue is applied to hold the paper in place. Ensure that you apply the appropriate amount of glue on your paper and avoid using too much glue for these to avoid creating the mess with your work and too little glue will also not get the work done.
By the time you are done with the first four steps most of the hard work has already being done and now it is time to start with the finishing of this product. Here a smooth brush should be used to level all the layers of the glue and to give the beads an identical appearance so as to keep them consistent with one of the other.
This, as said earlier is not a by rule project to do but one that requires creativity alone. After finishing all of the processes one can even opt to use a desired colour on the jewels to finish then fully and give them a beautiful appearance.
About the Author:
If you'd like to buy a low priced paper bead roller you can search locally or online. We highly recommend this website at http://www.paperbeadgirl.com for all your bead making needs.
0 nhận xét:
Post a Comment